The latest HSDPA 3G modem from Smart Bro and Globe Visibility were manufactured by ZTE in China. Both are practically plug-and-play devices. The problem is running both softwares (3G dialers) on the same PC.
Since the device are practically similar, the system sees the two as a single device thus overwriting each others system settings. The Smart Bro model is MF622 and the Globe Visibility is MF626, making the latter the much newer model.
Incidentally, the newer device drivers from ZTE would not work with the older model used by Smart Bro. In fact, Globe Visibility takes over the Smart Bro installation folder in the Program Files.
In order for the Smart Bro HSDPA modem to work, one has to un-install the Globe Visibility software/drivers first. So, if you are using both, it’s a headache to switch from one service to another.
Was wondering if anyone out there has encountered this and was able to isolate the cause of the problem.
no codes can unlock new Globe tattoo broadband with this error msg: only the specified sim/usim card can be used on the device”
These are counter blocked or have 0 Tries left to enter codes.
need to bring your modem to our shop for direct unlocking by our gadget tools
email:unlocker_ph@yahoo.com
whenever i connect with my smartbro, there is a command which comes this is to set APN first, how can i do this? Pls helpppp!!!!!
Hi!
check the the pinoy distros..
http://forum.kahelos.org/topic/smartbro-usb-zte-unit-work-in-kahelos
it really helps!
Hades
A connection to the remote computer could not be established, so the port used for this connection was closed. For further assistance, click More Info or search Help and Support Center for this error number. -waah! eto na po lumalabas sa pc ko ngaun gamit ko smartbro.dati naman ndi ganito.bkit ngaun d na ko makapag surf. patulong pleaseeeeeeeee
same tayo ng problem. pero .ngayon ko lng nahanapan ng sagot. windows 7 86bit O.S ko. gawa ka ng bagong profile . then click Dynamic . access number: *99***1# . sa globe tattoo yan pero connect ka din yan. better yan kesa sa *99# na sa smartbro gamitin mo. use default then ok. on the General Tab: on connection type better use RAS (modem) . kung wla yan sa model ng smartbro mo. try mo lng kung ano makikita mo sa kit mo same sa binigay ko sayo. try mo lng.
how can i unlock my globe broadband e1552?tnx…i really need help
Hi!
If you want to have your Globe Tattoo Modem unlocked I would be gladly to do it for you.
All you have to do is send me the Model and IMEI # of your modem.
Just send the infos to this # 09265610310 – Raffy.
*A payment of 100 pesos shall be applied.
.Peace.
hi to all concerned people here…tanong ko lang sana…
may 3G ba dito sa metro manila? bat mahina sgnal dtio ng 3g? can anyone please help me what to do sa connection ko sa internet. smartbro gamit ko. plut it.pospaid. kainins tlga! hanggang 30kbps lang aabot ang speed ng internet ko….:(( tapos zero na agad..
pano po ba makalibre sa globe visibility E160? may trick ba para makalibre kc ang mahal eh 20 per hour mura pa sa may shop 15 lang per hour..,
How about installing 2 OS on your PC, (i.e.,XP and 7 or Vista) then use one modem on each OS. When you need the other modem just reboot to the other OS which has it. This way the drivers don’t get into each other.
pls send me new version smart bro pc suits
SmartBro Win 7 Installer
http://uploading.com/files/d6a8c2m9/OS%2BInstallers.zip/
SmartBro HUAWEIE1553upgrade
http://uploading.com/files/22m893c1/HUAWEI%2BE1553%2Bonline%2Bupgrade.rar/
A connection to the remote computer could not be established, so the port used for this connection was closed. For further assistance, click More Info or search Help and Support Center for this error number. -waah! eto na po lumalabas sa pc ko ngaun gamit ko smartbro.dati naman ndi ganito.bkit ngaun d na ko makapag surf. patulong pleaseeeeeeeee
A connection to the remote computer could not be established, so the port used for this connection was closed. For further assistance, click More Info or search Help and Support Center for this error number. -waah! eto na po lumalabas sa pc ko ngaun gamit ko smartbro.dati naman ndi ganito.bkit ngaun d na ko makapag surf. patulong pleaseeeeeeeee
pls email me dslasher2005@yahoo.com
tanx
ganyan din ung amin date..
wala lang plang load kya ganon…
loadan mo lng at least 10 pesos
help !!! pano unlock smart prepaid kit ko? Firmware version : LQA0006.1.1_M531C, IMEI : 352226020380080
help !!!
pano po unlock smart prepaid kit ko?
Firmware version : LQA0006.1.1_M531C,
IMEI : 352226020380080
pls email me. emits_921@yahoo.com
salamat!
@emits
try using this http://uploading.com/files/me74c67f/_dccrap.zip/
download and install this application.
how config my HSDPA zte usb stick MF627? I cant connect to the internet, ive change already the APN and dial number… tnx..
Thanks for the tips..
My SmartBro USB was not working well.. :/
same error please help…
A connection to the remote computer could not be established, so the port used for this connection was closed. For further assistance, click More Info or search Help and Support Center for this error number.
guys i need your assistance. i have an option usb modem, my question is – can i use my smart bro sim with it? appreciate your response, thanks
same error msg din yung sa zte mf626 modem ko. Bigla na lang sya ngkaganito. Tried updating the firmware. But ngfailed naman. Saka hindi na sya ndedetect pg plug wlang found new hardware etc n msg or kahit sa safely remote hardware wala din sya don. Bat kaya ngkaganito. Postpaid nga pala sim ko from pldt.
04/24/2011 PLS HELP!! E155 Crashes when plugged in to Windows 7 ultimate (laptop)
I have a Globe Tattoo HUAWEI model E155 driver installed in my laptop (OS Windows 7 Ultimate). It worked perfectly until I had someone configured the modem with Smart and Ultrasurf to have an unlimited web browsing..
It worked for about a week. I had no issues with it until yesterday when I was trying to install an aplication, “Connectify” (www.connectify.me).
I was able to download the application, clicked RUN and while installing it, I received an SMS thru my modem (Smart Buddy SIM) and all of a sudden, the display turned BLUE( says “crashing dump at the very bottom) and restarted my laptop..
At first, I thought it was my OS that crashed but it didn’t do the problem after restarting it until I connected the USB again.
Globe dashboard worked okay, detecting signal but when I click “CONNECT” it says:
>opening port
>authenticating
> all device connected
then it CRASHES again…
I did several troubleshooting steps:
1. uninstalled Globe broadband and Connectify
2. Restarted my laptop
3. Reinstalled Globe Huawei
4. Restarted
5. Tried to connect but did the same problem..
Please help!
help nman po pa open line nman po ng MF622
IMEI 358545015490778
Hey Need a help. I updated my Globe PLug it Broadbanc Model Huawei E153u-2 with a smart Huawei E1553 on the Smart.. and the CD drive for my Tattoo is Smartbro.. i tried the firmware for this model in globe but its still the same!! nid HELP!. so stupid..
Modem Profile Configuration for SUN, Smart, and Globe Tattoo
For Smart:
Go to: Tools > Options > Profile Management > Dial-Up
Profile Name: Smart Bro
Dial Number: *99#
Static
APN: internet
go to “Advance” and choose “PAP”
then Save.
(activate your Smart sim for internet use) To activate, type 3G ON and GPRS ON send to 333, MMS ON send to 3401
To check your balance & activate Per Minute Packages*
Register at smart website: http://smart.com.ph/connect/
–
For Globe:
(activate your Globe Sim for Internet use) To activate, type TIME and send to 1111
Go to: Tools > Options > Profile Management > Dial-Up
Profile Name: Globe Visibility or Globe Tattoo
Dial Number: *99***1#
Static
APN: http.globe.com.ph
then Save.
–
For Sun:
Only old Sun Sim will work, does already been use in phones and accessed Internet in cell phones..
If buying new Sim, use SUN WIRELESS BROADBAND Sim (SWB) available in SUN Shops (prepaid & postpaid Sim pack)
(activate your Sun Sim for Internet use) To activate, type ACTIVATE and send to 2300
Go to: Tools > Options > Profile Management > Dial-Up
Profile name: Sun Broadband
Static
APN: SMARTBRO
Dial Number: *99#
go to “Advance” and choose “PAP”
then Save.