If you are subscribed to the Smart Bro Plan 999, you can still connect or configure it to a router so you can share the internet connection to other WiFi devices in your house. See the step by step instructions below to setup Smart Bro with your WiFi router.
How to Configure Smart Bro with a Router:
Step 1. First you must connect the Ethernet cable from the smartbro antenna to the WAN/Internet port of the router.
Step 2. Connect your computer to one of the Ethernet ports of the router.
Step 3. Make sure that ur PC is set to Dynamic IP (Obtain IP automatically)
Step 4. On your Internet browser, type 192.168.1.1, leave username blank and password admin.
Step 5. On the router’s setup page, set the Internet connection type to Automatic Configuration (DHCP) or Obtain an IP Automatically.
Step 6. Save the settings.
Step 7. Check the Status Tab to check if the router was able to get the connection from SmartBro.
Step 8. If Automatic Configuration (DHCP) didnt work, set the router to Static IP. Take note of the IP address, subnet mask, default gateway, DNS 1 and 2 of your PC when its connected directly to SmartBro, then put it on the corresponding fields.
It just started a couple of days, before it was really okay, but now.. with wifi signal but can’t browse the internet.. only work if you directly plug the connection to a pc.. can’t use my wifi router.
I have this CDR King wifi router and configured it, my devices can connect but cannot browse the internet. It says that there is a problem with the network. need help please.
Hi there, I desire to subscribe for this blog to obtain most up-to-date updates, therefore where can i do
it please assist.
my smart bro router is working but the signal at the second floor of the house is weak. How can I
boost the signal?
Greetings! Very helpful advice in this particular article! It
is the little changes that produce the most important changes.
Many thanks for sharing!
Hi po magandang gabi mga master, yung dmsrtbro wifi router ko po if I turn on po tapos mga one minute it will automatically turn off po. bigla pong na tuturn off.. sana po matulungan niyo ako ..
Hello,
Can you please help me out? I have brought a wifi router to my family so that they can connect all gadgets at home, (PANDI, BULACAN) However, whenever they connect the router, they have to go thru the same set-up (Name, REF, ACCOUNT NO. etc) online – WHY? My family gave up already and stop using the router, but it is not the router that has a problem since we setup everything at my home (MAKATI)
What seems to be the problem? Is it SMART BRO? Only one gadget can be connected on WIFI, if they tried to connect another one, they have to go to fillup all the form online again! Hassle!
sir yung connection namin smartbro. iinstallan sana namin ng router linksys e900.. nainstalled na namin pero wala siyang internet nadedetect nadin ng cp na may wifi. okay naman din yung signal niya.. wala lang siyang internet.. ano ba dapat gawin sir?
wala kasi kaming modem sir..
reply naman!!
have the same problem. wifi router can’t detect our internet. were you able to fix yours? help please!!!
192.168.1.1 for Sun Broadband Wireless Modem Log in Page.
anyone here knows if there is a dsl to ethernet adpater converter? just got my modem+wifi router from a friend. i was planning to set it up to my smartbro. my problem ryt now is that the WAN/Internet port is a DSL port. i cant connect the ethernet cable from the canopy antenna of smartbro.
@zte, I’m trying to setup asus RT N13u B1 to my smartbro internet and only the pc has internet and no wifi detected. when I try to setup a static ip and copied the pc ip, subnet, default gateway is says “255.xxx.xxx.x is not a valid ip address” need your help.
Anyone here knows how to reconnect smart bro plan999, pls i need help to reconnect it because we just shifted to our new house.I am just a two month subscribed to this and it will be costly to pay P1450 to smart just to get internet connection.btw everything has been set-up already including the router, my only problem was that we dont have internet connection and it asks for log in id and password.any help would be very much appreciated.thanks.
Our router is Linksys e1500. I followed the instructions but it didnt work. Does it need a different setup or do i have to reinstall the router? Thanks.
Paano kung di mabukas ang 192.168.1.1 paulit u;it na nmn ginawa aya pa mabukas
try the reset button of the router, gamit ka lang paper clip to push the small button somewhere on the side of the router.
how can we reconnect our internet connection? we already paid, then its been connected but we cannot connect to the server…. what should we do?
try to call for assistance of smart wireless centers near you..
http://www.speedtest.net/result/1943799179.png
This is a speedtest result of my 4G ROCKET WIFI PLUS ng Smartbro 0.58Mbps out of the publicly promised 20.0 Mbps!!! It’s been more than 1 month now since April 4 that Smartbro received by complaint on slow connection. But that F_____G company is not doing anything!!! Can anyone from the National Telecommunications Commission (c/o Secretary Mar Roxas) be sensitive enough to check the Smartbro’s HONESTY in terms of advertising 20.0Mbps but delivering to its customer a turtle-speed of 0.58Mbps or 2.9% ONLY of what this F_____G Smartbro advertises?
Hello! thanks for the help! I have been trying to connect my Smart Bro through a router for a little more than three months but I couldn’t that I almost lost my patience. And when I found your site, I followed you instructions and finally, FINALLY, I have a wifi connection. Thanks a lot! :-)
wich are the dns1 and dns2 for reaching the provider smart bro through my router linksys ?
you need to reset the router because it has been used previously, so you won’t be able to guess the password.
the above data is for a new or unchanged password router.
when i enter the 192.168.1.1 my browser keep on saying error 504. so i tried looking in the command prompt and got this 192.168.0.1 it worked but when i type the password and username i still get error in password and username everytime.